Advertisement
A.
!
!
!
!
!
B.
!
C.
!
CARE AND CLEANING INSTRUCTIONS
A. Cleaning Your Acrylic Bath
!
Do not use powdered cleaners unless the cleaner is
fully dissolved in water. Solid substances could
block the air jets.
!
Do not use full strength bleach or ammonia cleaning
solutions. Chemically active cleaning solutions can
damage the bath surface.
!
Do not use abrasive cleansers or solvents on acrylic
surfaces. Abrasive cleaners and solvents can
damage the bath surface.
!
Wipe out your acrylic bath with a soft cloth after
each use.
!
Avoid detergents, disinfectants, or cleaning products
in aerosol cans.
NOTE:
To restore dull or scratched units: Apply white
automotive polishing compound with a clean rag.
Rub scratches and dull areas vigorously. Wipe off
residue. Follow with a coat of white automotive paste
wax. Do not wax areas where you walk or stand.
B. Cleaning Your User Keypad
!
Use a soft cloth to wipe the keypad after each use. If
the surface becomes dirty, use a non-abrasive soap
and warm water to clean.
C. Nozzle Replacement
How to replace nozzle:
!
Insert the rod into the nozzle.
8
1216853-T01-B
Advertisement
