Troubleshooting - Wasp WLS 9500 Quick Start Manual

TROUBLESHOOTING

Problem
No power
to scanner
Possible Cause
Check
system
Resolution
power;
ensure
power
supply, if
required,
is
connected.
Scanner decoding barcode, but data
Problem
Scanner not
Possible Cause
programmed for
correct host
interface
Check scanner
Resolution
host parameters
or edit options
(The scanner
host barcodes
are provided
below in the
Start Here if you
have a USB
scanner section
and the Start
Here if you have
a keyboard
wedge scanner
section.)
Scanner not working
Incorrect Interface/power
interface cables are
cable loose
used
Ensure Check for
that loose cable
correct connections
interface
cable is
used
not transmitting to host
Interface cable is
loose
Check for loose
cable connections
4
Quick Start Guide
Scanner not decoding barcode
Scanner not Barcode
programmed unreadable
for barcode
type
Program the Ensure
scanner to barcode is
read that not
type of defaced;
barcode. try
scanning
test
barcode of
same
barcode
type
No keyboard connected
A keyboard is not being used with this
device.
Scan the IBM AT NOTEBOOK
barcode (This barcode is provided
below in the Start Here if you have a
keyboard wedge scanner section.)
Distance
between
scanner
and
barcode
incorrect
Move
scanner
closer to
or
further
from
barcode