Chapter 5. Useful Utilities; Introduction; Scanner Setting; Scan2Key - Wasp WDT 3200 Product Reference Manual

Wasp bar code scanner product reference guide

Hide thumbs Also See for WDT 3200:

Table of Contents

WDT 3200 Product Reference Guide

Chapter 5. Useful Utilities

This chapter discusses software applications you can use to make your

experience with the WDT3200 more productive.

When it is necessary for you to change the default barcode symbologies for a

different application, Scanner Control Panel allows you to change default

symbologies, place delimiter characters behind scanned data, and save the

settings. Run this program from \Start\Setting\Control Panel\Scanner

Setting.exe. An example of the Scanner Control Panel/Settings tab is shown

below:

This program is enabled by default.

The Scan2Key application can route input from the scanner port to the keyboard

buffer, with the result that all scanned data will be treated as if it were input from

the keypad. With this router, scanned data can be directly input into generic

applications like MS Pocket Word.

Table of Contents