Installation - AEG L 98699 FL2 User Manual

Problem
After a steam
programme, gar-
ments are not
sufficiently
smooth.
The drum is emp-
ty and the dis-
play shows there
is some weight
in .
The drum is full
but the display
shows 0.0 kg.
After the check, activate the appliance.
The programme continues from the
point of interruption.
If the problem occurs again, contact the
service centre.

13. INSTALLATION

13.1 Fixing plate kit
(4055171146)
Available from your authorized dealer.
13.2 Unpacking
Possible cause
A wrong STEAM pro-
gramme has been selec-
ted (e.g. Synthetic in-
stead of Cotton).
Excessive laundry load.
It is necessary to set a
tare.
You loaded the laundry
before to activate the
appliance.
Possible solution
Note the composition of the
fabric.
Reduce the laundry load
Press button
the appliance and to activate it
again.
Press button
the appliance . Empty the drum
and obey to the necessary
steps. (Refer to 'Loading the
laundy')
If the display shows other alarm mes-
sage, contact the service centre.
If you install the appliance on a plinth,
secure the appliance in the fixing plates.
Follow the instructions supplied with the
kit.
1.
Use the gloves. Remove the external
film. If necessary, use a cutter.
ENGLISH
31
to deactivate
1
to deactivate
1