Fm Operation; Switching From Dab To Fm Mode; Auto Scan; Manual Scan - Hitachi AXM1204E Instruction Manual

FM Operation

Switching from DAB to FM Mode

To switch the unit to FM mode, Press (tap) MODE repeatedly to select FM mode. The display
will show the frequency.
GB

Auto Scan

To search for an FM station, press (tap) SCAn/
been found, the scanning will stop automatically.

Manual Scan

To search for FM stations manually, press (tap)
frequency is reached.
With FM radio it may be necessary to fine tune each station by pressing (tapping)
Each press/tap will adjust the frequency by 0.05MHz. If reception is still poor adjust the position of
the aerial or try moving the radio to another location.

Audio Mode

Press SELECT/MOnO/ST. on the remote control to toggle between the Stereo or Mono
selection.
The unit will automatically switch between stereo and mono mode, but you can override this and
switch this function manually. This is helpful when receiving poor signal reception.

Preset Stations

You can store up to 30 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold (tap and hold) MEMORY. The "Preset Store <#: (Empty)>" will show on
the display.
2. Press (tap)
MOnO/ST. to confirm.
3. The station will be stored and the screen will then show "Preset # Stored".
24
to select your desired preset station number and then press SELECT/
to start the auto scan. Once a station has
repeatedly until your desired
repeatedly.