Hitachi AXM1206E Quick Start Manual

Quick Start Guide
AXM1206E
Micro HI-FI System
with docking for iPhone/iPod
Thank you
for purchasing your new Hitachi Micro HI-FI
System with iPod / iPhone dock.
Please follow this quick start guide for a successful rst
time set up.
We recommend that you spend some time reading this
instruction manual in order to fully understand all the
operational features it o ers.
Read all the safety instructions carefully before use and
keep this instruction manual for future reference.
GB
1 1
S S
Unpacking
tep tep
Remove all packaging from the unit. Retain the packaging. If you dispose
of it please do so according to any local regulations.
The Main Unit The Ampli er Speakers x 2
Remote Control iPod / iPhone Ribbon Cable
Docking
MENU/SCAN VOL
SOURCE
MUTE VOL
/PROG
RANDOM
REPEAT DISPLAY
A-B
S-BASS LOUNDNESS
CLOCK TIMER/SLEEP
DIM
DAB/FM Aerial
Instruction Manual Quick Start Guide
2 2
S S
Operating Your Remote Control
tep tep
Removing the Plastic Strip from the Remote Control
Remove the protective plastic strip
from the battery compartment if the
battery is being used for the rst time.
It is located at the bottom of the
remote control.
Replacing the Battery in the Remote Control
1. Remove the screw from the back of
the remote control using a screw
driver (not supplied).
2. Slide the battery compartment out
of the remote control and insert a
new battery (CR2025). Make sure
the '+' sign is facing up.
3. Slide the battery compartment back
into the remote control. Replace the
screw using a screw driver (not
supplied).
3 3
S S
Connections
tep tep
Speaker
➎
➊ Connecting the DAB Aerial
Connect the DAB aerial to the DAB Aerial socket. Extend the aerial,
to receive the best FM reception.
➋
Speaker Connection
Connect the speaker cables at the back of the speakers to the
SPEAKER OUTPUT (L/R) sockets at the rear of the unit.
➌
Connecting the Control Cable
Connect the connection cable to the cable sockets on the Ampli er
and the CD player.
4 4
S S
Clock Setting
tep tep
Displaying the Clock
Press the CLOCK button in any mode to display the clock.
Auto Setting the Clock
The clock can be updated
automatically if you can receive a
VOL
DAB signal in your location.
In order to synchronise to the
current local time you must leave
VOL
it on the DAB station for a short
period of time.
MENU/SCAN VOL
SOURCE
MUTE VOL
Manual Setting the Clock
/PROG
Manual setting the clock can be
RANDOM
done in STANDBY mode. REPEAT DISPLAY
A-B
S-BASS LOUNDNESS
1. In STANDBY mode, press the
CLOCK TIMER/SLEEP
CLOCK button. 'CLOCK SET' will
DIM CLOCK
scroll across the display, then
'24HR' will ash.
2. Press the VOL + / - to select 24
or 12 hours, then press CLOCK.
3. Press the VOL + / - to to set the
hours, then press CLOCK.
4. Press the VOL + / - to to set the
minutes, then press CLOCK.
T T
Well done,
your new Micro Hi-Fi is now ready to use.
ip: ip:
You will nd that there are many exciting features available. To get to know all these features, please take some time to
read the instruction manual provided with your Micro Hi-Fi System.
Speaker
The Main Unit
➌
➊
➍
➋
The Ampli er
➍ Connecting to the iPod / iPhone Dock
Connect the iPod/iPhone dock to the socket marked DOCK on the back of the
CD player.
➎ Connecting to the Mains Supply
- This unit is designed to operate with an AC 220-240V ~50/60Hz power supply.
- Connecting the unit to any other power source may cause damage to the unit.
Unwind the mains cable to its full length. Connect the mains plug to a mains
socket. Make sure the mains plug is fully inserted into the mains socket. The unit
is now connected and ready to use.
- To switch the unit o completely, remove the mains plug from the mains socket.
5 5
S S
Basic Operation
tep tep
Powering ON/OFF
When you rst connect the unit to the mains socket. The unit will be in
STANDBY mode.
1. Press the STANDBY button to switch the unit on.The word "HELLO"
will scroll across the display.
2. Press the STANDBY button to switch the unit back to standby mode.
The words "BYE BYE" will scroll across the display. The clock will be
displayed for a few minutes then the clock will switch o and the
STANDBY button will glow red. The unit will switch to ECO-Power
mode.
3. Disconnect the mains plug from the mains socket if you want to switch
the unit o completely.
Selecting Functions
Turn the FUNCTION dial on the unit or press the FUNCTION button on the
remote control to switch between DISC, USB, TUNER, DAB, DOCK, AUX1
and AUX2 modes
MENU/SCAN
SOURCE
MUTE
RANDOM
REPEAT
A-B
S-BASS
CLOCK TIMER/SLEEP
DIM
QSG-AXM1206E-121129V1-1
VOL
FUNCTION
VOL
/PROG
DISPLAY
LOUNDNESS