Operating Your Remote Control; Remote Control Operation Range - Hitachi AXM1204E Instruction Manual

Operating Your Remote Control

1. Press and slide the back cover to open the
battery compartment of the remote control.
2. Insert two AAA size batteries (not included).
GB Make sure the (+) and (–) ends of the batteries
match the (+) and (–) ends indicated in the
battery compartment.
3. Close the battery compartment cover.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire,
personal injury or damage to property.
• When the battery is exhausted, the remote control will not function.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with local
regulations.
Handling the Remote Control
• Be aware of your fingernails when removing the battery cover and the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or
battery leakage may occur and result in physical injury, and/or property damage, and/or fire.

Remote Control Operation Range

• The remote control sensor on the front unit is
sensitive to the remote control's commands up
to a maximum of 4 metres away and within a
maximum of a 60° arc.
• Please note that the operating distance may
vary depending on the brightness of the room.
14
MODE
MENU
MEMORY
30° 30°
Max. 4 m
STANDBY
MUTE MODE
EQ VOLUME
SCAN
CLOSE OPEN MEMORY
SELECT
MONO/ST.
MEMU/INFO
FOLDER
SLEEP TIMER
1 2 3
RANDOM
4 5 6
7 8 9
REPEAT
INTRO 0