Replacing The System-Board Shield; Procedure; Post-Requisites - Dell Inspiron 24 5000 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Align and place the screw holes on the system-board shield with the screw holes on the display-assembly base.
CAUTION: Before replacing the screws, ensure that cables connected to the system board are not being pinched.
2 Replace the five screws (M3x5) that secure the system-board shield to the display-assembly base.
Identifier
Status

Post-requisites

1 Replace the back cover.
2 Replace the stand.
GUID-5274B19C-AEEA-4EF8-952E-C1CDE89980E4
Released

Replacing the system-board shield

computer. After working inside your computer, follow the instructions in
GUID-04033FC7-CBF9-42D6-B23A-D121063D557B
Released
GUID-3C07FF4A-549D-4C06-963B-7FEB41308018
Released
After working inside
www.dell.com/
Replacing the system-board shield
13
31