Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the slots on the system-board shield with the ports on the system board and place the system-board shield on the display-
assembly base.
2. Align the screw holes on the system-board shield with the screw holes on the display-assembly base.
3. Replace the screws that secure the system-board shield to the display-assembly base.
Post-requisites
1. Replace the
back
cover.
2. Replace the stand.
28
Replacing the system-board shield
Replacing the system-board shield
computer. After working inside your computer, follow the instructions in
13
After
Hide quick links:
Advertisement
Table of Contents
