Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Place the back cover on the middle frame and align the tabs on the back cover with the slots on the middle frame.
2
Slide the back cover towards the back panel to push the back cover tab under the latch on the system-board shield.
Identifier
Status
Post-requisite
Replace the stand.
GUID-411D5FFA-086D-432E-9CE3-0ECBF9B7BA71
Released
computer. After working inside your computer, follow the instructions in
GUID-48958560-CB37-4F31-B0D2-4F443CDC3871
Released
GUID-9FB29BBC-29E9-43A8-8FC3-A43B10AB80DF
Released
Replacing the back cover
After working inside
www.dell.com/
Replacing the back cover
7
21