Water Purge Valve Replacement Procedure - Mitsubishi Electric PUHY-M200YNW-A1 Service Handbook

[8-14 Hydro Unit Maintenance Instructions ]
8-14-11

Water Purge Valve Replacement Procedure

Operation procedures
1) Remove the rear panel (7 screws).
2) Remove the pipe cover from the pipe with
the water purge valve.
3) Loosen the flare nuts with a wrench, and re-
place the water purge valve.
132
- chapter 8
(1)
(2,3)
Pipe cover
Water purge valve
Illustrations
Service panel (back)
BS_08_E