Operation; Controls - Vulcan-Hart V SERIES VB150 ML-126552 Installation And Operation Manual

V SERIES FOOD HOLDING, TRANSPORT, & BANQUET CARTS
receptacle is
grounding type,
electrician. DO NOT REMOVE THE
GROUNDING PRONG FROM THIS
PLUG.
CAUTION: Verify that the power
source matches the Serial Data Plate
located on the lower back corner of
the cabinet
configuration before the connection
is made. (Fig.2)
PLEASE NOTE:
It is recommended that prior to placing the cabinet in operation that it be
preheated at the highest temperature setting for a period of 30 to 45 minutes.

CONTROLS

Models: VB90, VB96, VB150, VBP5I,
VBP7I, VBP13I,
VBP77I, VBS15, VHDP5, VHP3, VHP7,
VHP8, VHP15, VHP20
POWER
INDICATOR LIGHT
THERMOMETER
(Fig. 3)
Power Indicator Light:
The Red Power Indicator Light indicates
power is supplied to the cabinet. The
red light will stay lit as long as the
cabinet is plugged in.
not the proper
contact an
and the plug

OPERATION

VBP15I, VBP33,
FULL-RANGE
THERMOSTAT
HEAT INDICATOR LIGHT
Heat Indicator Light:
The Amber
indicates the heating element(s) are
heating. The amber light will stay lit as
long as the heating element(s) are
engaged. Once the predetermined
temperature is achieved, the heating
element(s) will begin to cycle. During
this period, the amber light will turn on
and off.
Thermometer:
The Thermometer indicates the interior
temperature of the cabinet.
Thermostat:
The Thermostat turns power on to the
heating element(s).
setting is from 1 to 10. The greater the
thermostat setting number, the higher
the temperature. (Fig. 4)
5
F-41140 (09-09)
(Fig. 2)
Heat Indicator
The thermostat
Light