Table Of Contents - Stihl FS 110 Instruction Manual

Contents
Guide to Using this Manual .............. 2
Safety Precautions and Working
Techniques ....................................... 3
Approved Combinations of
Cutting Tool, Deflector,
Handle and Harness ....................... 18
Approved Power Tool
Attachments .................................... 20
Mounting the Bike Handle .............. 20
Mounting the Loop Handle ............. 22
Adjusting the Throttle Cable ........... 24
Fitting the Carrying Eye .................. 24
Mounting the Deflector ................... 25
Mounting the Cutting Tools ............. 26
4-MIX Engine .................................. 30
Fuel ................................................ 30
Fueling ............................................ 31
Fitting the Harness ......................... 32
Balancing the Brushcutter .............. 33
Starting / Stopping the Engine ........ 34
Operating Instructions .................... 37
Cleaning the Air Filter ..................... 37
Motor Management ........................ 38
Adjusting the Carburetor ................ 38
Spark Arresting Screen
in Muffler ......................................... 40
Checking the Spark Plug ................ 40
Lubricating the Gearbox ................. 41
Replacing Starter Rope
and Rewind Spring ......................... 42
Storing the Machine ........................ 45
Replacing the Nylon Line ............... 45
Sharpening Metal Cutting Tools ...... 47
Inspections and Maintenance by
Dealer ............................................. 47
Maintenance Chart ......................... 48
Parts and Controls .......................... 50
Specifications ................................. 53
STIHl
FS 110, FS 110 R
Special Accessories ....................... 53
Maintenance and Repairs .............. 54
STIHL Incorporated Federal and
California Emission Control
pWarranty Statement ...................... 55
Trademarks .................................... 57
English / USA
Allow only persons who understand this
manual to operate your brushcutter.
To receive maximum performance and
satisfaction from your STIHL brush-
cutter, it is important that you read and
understand the maintenance and safety
precautions, starting on page 3, before
using your brushcutter.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
!
Warning!
Because a brushcutter is a high-speed
cutting tool some special safety pre-
cautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury. Make sure
your unit is equipped with the proper
deflector, handle and harness for the
type of cutting attachment being used.
Always wear proper eye protection.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the appear-
ance of your brushcutter differs from
those described in this manual, please
contact your STIHL dealer for informa-
tion and assistance.
1