Configure User Rights; Security Page-Auth User Tab - HP StorageWorks Installation Manual

Configure user rights

Perform this procedure to change the administrator-level and operator-level passwords used to
access the EWS interface through the Enter Network Password dialog box.
NOTE: If you want to create a user account, review the Embedded Web Server User Guide for
more information. Before you create a new user, you should review information on the security
features provided with SANtegrity and RADIUS Servers, including authentication for the various
interfaces such as Web (HTTP), CLI, Serial Port, E Port, N Port, and OSMS.
To configure passwords:
1. Select Configure > Security to display the Authorize Users (Auth Users) tab
Figure 45 Security page–Auth User tab
2. Under Current User Records, enter the new password in the New Password column. Use 16 or
fewer alphanumeric characters.
3. Enter the new password in the Confirm New Password column.
4. Select the appropriate role for the user from the Role drop-down list: Adminstrator, Operator, or
No Role.
5. Click the Include CLI box to authorize the user to use the CLI.
Click Activate to activate save the information. The message Your changes to the Auth
Users configuration have been successfully activated. Login may be
required. is displayed.
78 Using the Embedded Web Server
Figure 45.