Dimensions - Exmark LAZER Z PROPANE Operator's Manual

– 60 inch Deck: 5.5 inches (14 cm)
– 72 inch Deck: 5.5 inches (14 cm)
• Cutting Height Adjustment:
Foot activated lever is used to adjust the cutting
height from 1 inch (2.5 cm) to 5 1/2 inches (14
cm) in 1/4 inch (6.4 mm) increments.
• Mulching Kit: Optional.

Dimensions

Overall Width:
52 inch
Deck
Without 45.7 inches
Deck (116.1 cm)
Deflector 56.3 inches
Up (143.0 cm)
Deflector 64.8 inches
Down (164.6 cm)
Overall Length:
52 inch
Deck
Roll Bar - 79.2 inches
Up (201.2 cm)
Roll Bar - 80.9 inches
Down (205.5 cm)
Overall Height:
Roll Bar - Up
70.5 inches (179.1 cm)
Tread Width: (Center to Center of
Tires, Widthwise)
52 inch
Deck
Drive 38.5 inches
Wheels (97.8 cm)
Caster
32.8 inches
Wheels (83.3 cm)
60 inch 72 inch
Deck Deck
53.0 inches 59.1 inches
(134.6 cm) (150.1 cm)
62.5 inches 73.5 inches
(158.8 cm) (186.7 cm)
72.8 inches 84.9 inches
(184.9 cm) (215.6 cm)
60 inch 72 inch
Deck Deck
83.1 inches 86.1 inches
(211.1 cm) (218.7 cm)
84.8 inches 87.8 inches
(215.4 cm) (223.0 cm)
Roll Bar - Down
46.8 inches (118.9 cm)
60 inch 72 inch
Deck Deck
41.6 inches 43.6 inches
(105.7 cm) (110.7 cm)
39.5 inches 47.1 inches
(100.3 cm) (119.6 cm)
Wheel Base: (Center of Caster Tire to
Center of Drive Tire)
52 inch Deck 60 inch Deck
48.0 inches 51.6 inches
(121.9 cm) (131.1 cm)
Curb Weight:
52 inch Deck 60 inch Deck
1307 lb (593 kg) 1348 lb (611 kg)
Accessory Weights:
Note: This machine is not designed to accommodate
an Ultra Vac Collection System. Due to the front
weights for the propane system, the additional front
weights required for an Ultra Vac cannot be installed.
The additional weight would cause an excessive
load to the frame and hydros; consequently voiding
the warranty. Do Not install or use an Ultra Vac
Collection System with this machine.
All other accessories do not significantly affect the
stability of the machine; therefore, no weight kits are
required.
21
Specifications
72 inch Deck
53.6 inches
(136.1 cm)
72 inch Deck
1407 lb (638 kg)