PTO Switch Symbols
1. PTO–disengage
1. IMPORTANT: Only use replacement tank(s) that are free
of dents or damage. Match size and type required on tank
specification decal.
2. Stop the machine on a level surface, disengage PTO, and
engage parking brake.
3. Close the fuel valve(s) on ALL tanks by rotating clockwise,
continue to run engine.
4. When the engine stops, remove key.
5. Disconnect LPG fuel hose(s).
6. Unlatch cylinder bracket(s).
126-4553
2. PTO–engage
126-3277
7. Remove empty tank(s). Check valve and fittings for debris
or damaged o-rings.
8. Install full replacement tank(s) by aligning center hole on
tank collar over mounting tab.
9. Latch bracket(s) and ensure tank(s) is securely fastened
to mower.
10. Re-connect fuel hose(s).
11. Slowly open fuel valve(s) counterclockwise to equalize
pressure. Check for leaks.
17
Safety