Zoom H4n Pro Operation Manual page 44

You can operate the H4n Pro from a distance with the optional remote control.
0-100
+: increase (raise)
Select the input source
The indicator corresponding to the
button shows the input status.
Green: selected input source
Red: input is clipping
Press for less than one second
Stopped
Playing
(If there are marks, FF and REW jump to
the nearest mark)
Playback paused
Press for more than one second
Search forward/backward
The longer the button is pressed, the
faster the search speed. Searching will
Press for less than one second
Stopped
FF: Skip forward one second
REW: Return to beginning
Playing
Press for more than one second
Playback paused
Search forward/backward
043
1-100
+: increase sensitivity
(amplify)
(attenuate)
Recording/recording
Stop recording and reset counter to 0
standby/paused
Playing/paused
Stop playback and stop counter
Recording Stop recording and stop counter
Playing Stop playback and stop counter
Recording paused
Stop recording/playback
Playback paused
Recording and placing marks.
Enter recording standby and reset counter
Stopped
to 0.
Start recording and counter.
Recording standby
Recording Playing
This can be used only when a track is in recording standby.
Stopped Enter recording standby
Recording/standby Stop recording (playback continues)
Playing
Recording starts and counter continues
Stopped Stop recording and counter
Recording standby Start recording and start counter
Start playback and start counter
Stopped
Recording standby
Start recording and counter
Recording/paused
Resume paused recording
Playing/paused
Resume paused playback
Stopped Start playback
While overwrite setting: Stops recording
Recording
While always new setting: Pauses recording
Start recording and the counter begins
Recording standby
to move
Playing
Pause playback