Zoom H4n Pro Operation Manual page 147

RvsDelay This delay supports long delay times of up to 2500 ms.
10–2500 ms,*
(1) TIME
(See P.146)
(2) FEEDBACK 0–100
(3) HIDAMP 0–10
(4) MIX 0–100
*milliseconds
HALL This reverb simulates the acoustics of a concert hall.
ROOM This reverb simulates the acoustics of a room.
SPRING This is a spring reverb simulation.
ARENA This simulates the acoustics of an arena-sized venue.
T ROOM This simulates the acoustics of a tiled room.
This is a spring reverb simulation with a bright and clear
M SPRING
tone.
(1) DECAY 1–30
(2) PRE DLY 1–100
(3) TONE 0–10
(4) MIX 0–100
Sets the delay time.
Adjusts the amount of feedback.
Adjusts the damping of high frequencies in the
delay sound.
the original sound.
Sets the reverb duration.
Sets the time between when the original sound is
input and reverb starts.
Adjusts the tone.
the original sound.
Note durations
Parameters with values allow you to make settings in note units
based on the metronome tempo. The lengths of the notes are as
follows.
Thirty-second
3
note
Sixteenth note
Quarter note
3
triplet
Dotted six-
teenth note
Eighth note
x 2
· The note values that can be selected depend on the parameter.
· Certain combinations of tempo and note values could exceed
parameter ranges. If this occurs, the value will be halved or even
quartered to achieve the allowed range.
Half note Quarter note
x 3
triplet x 3
Dotted eighth
note
Quarter note
Dotted
quarter note
Quarter note Quarter note
x 20
x 2 x 20
146