Volvo 940 Owner's Manual page 43

1993 Volvo 940
The radio features anti-theft circuitry. If the set is removed from the vehicle or if the battery power is
disconnected, a special code must be entered to enable operation of the set. Refer to the radio code card
supplied with your vehicle or ask your dealer for the correct code.
Using the code
After installation or when the set has been disconnected from power, the set displays "codE" when it is
switched on.
Enter the 4-digit code using the preset buttons. If the correct code is entered, "codE" is no longer
displayed and the set is ready to use.
Incorrect code
If an incorrect code has been entered "EEE" is displayed for 1 second and then "codE". Enter the correct
code. After three unsuccessful coding attempts the set locks for 2 hours. The unit must be connected and
turned on during this time. Enter the code again once this time has elapsed.
pg. 1:35 Radio
file:///K|/ownersdocs/1993/1993_940/93940_1_33.html (2 of 9)12/30/2006 9:44:21 AM