Volvo 940 Owner's Manual page 163

1993 Volvo 940
Material:
Primer - spray
Paint - spray
Masking tape
NOTE:
When touching up the car, it should be well cleaned and dry and have a temperature exceeding 60°F
(+15°C).
Mask with tape and paper prior to painting larger surfaces. Remove the masking immediately after
application of the last paint coat, before the paint starts to dry.
Touching up is as follows:
Remove paint flakes with masking tape.
Shake the spray can for at least 1 minute. Spray on the primer. Move the can slowly and evenly back
and forth over the spot and about 8-12 in. ( 20 - 30 cm) from the surface. Protect the surrounding
surfaces with suitable paper.
WARNING!
Spray painting should be done in a well ventilated and dust-free
area.
When the primer has dried, apply the surface enamel in the same way. Spray on several times and
allow the paint to dry a minute or so between each application.
file:///K|/ownersdocs/1993/1993_940/93940_7_1.html (6 of 10)12/30/2006 9:44:34 AM