Management Ethernet Port Leds - HP 5920 Series Installation Manual

Table 18 QSFP+ port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow (3 Hz)
Off

Management Ethernet port LEDs

A management Ethernet port has one LINK LED and one ACT LED to show its link and data transmission
status.
Table 19 Management Ethernet port LEDs description
Led mark
LINK
ACT
Description
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 40 Gbps.
The port is sending or receiving data at 40 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
Status Description
Off The management Ethernet port is not connected.
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
Off The management Ethernet port is not receiving or sending data.
Flashing yellow The management Ethernet port is sending or receiving data.
50