Samsung F6400 Series E-Manual page 91

●
White Balance
Adjusts the colour temperature of the picture to make white objects look white and the overall
picture appear natural. Adjust each colour's luminosity with the offset menu and the brightness
with the gain menu. To restore the default values, select Reset.
●
10p White Balance
"
This function is only not available on the LED F5300 - F5500 series and PDP F5500 series.
Adjusts the white balance by adjusting the brightness of the red, green, and blue elements in
10-point intervals. This option is only available when
be supported by some external devices.
●
Gamma
Adjusts the primary colour intensity.
●
Expert Pattern
"
This function is only not available on the LED F5300 - F5500 series and PDP F5500 series.
Displays picture calibration patterns on the screen without using a separate pattern generator or
filter. Pattern1 is used to calibrate the contrast, and
colour saturation. If the screen menu disappears or a different menu is activated while the screen
is being calibrated, this option will save the changes up to that point and automatically deactivate
that menu. This feature is enabled in Component and HDMI modes only.
●
Motion Lighting
Adjusts the picture brightness depending on the on-screen movements for reduced power
consumption. This feature is only available when
available in 3D mode. In addition, adjusting
feature.
Try Now
Picture Mode
Try Now
Pattern2
Picture Mode
Contrast or Brightness
Try Now
is set to Movie
is used for calibrating the colour and
is set to Standard
automatically deactivates this
and may not
and is not