If You Want To Rerun Setup; If You Want To Reset This Feature; If You Want To Turn The Store Demo Mode On Or Off - Samsung F6400 Series E-Manual

If You Want to Rerun Setup

Screen Menu > System
You should do Setup again at home although you did in shop.Before Setup starts, the PIN input screen
displays. The default PIN is "0-0-0-0".

If You Want to Reset This Feature...

Select System - Setup
Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change the PIN
number, use the Change PIN function. You should do Setup (Menu → System) again at home although
you did in shop.
"
If you forget the PIN code, press the standard remote control buttons in the following sequence in Standby
mode, which resets the PIN to "0-0-0-0": MUTE M → 8 → 2 → 4 → POWER (on).
"
If you use Smart Touch Control, please press MUTE → +(Volume up) → RETURN → -(Volume down) →
RETURN → +(Volume up) → RETURN in TV On model.

If You Want to Turn the Store Demo Mode On or Off

To set or unset Store Demo mode outside of Setup, press and release the Controller when the power
is on. The Function menu screen appears. Push the Controller to the left (to MENU (
for more than 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function
menu using the Controller, push the Controller to the right (to Source (
seconds.
> Setup
(Initial Setup).
m
)) and hold
s
)) and hold for more than 5