Using The Wps Button; Failed Wireless Connection; Wireless Network Connection Failed, Or No Wireless Router Selected; Unable To Connect To A Wireless Router - Samsung F6400 Series E-Manual

Using the WPS Button

If the router has a WPS push button, you can use it to connect the TV to the router automatically. WPS
automatically configures the SSID and WPA key settings.
11
Setting Network Type
21
Select WPS(PBC)
31
The TV automatically acquires the SSID and security key settings and connects to the network. A
confirmation message is then shown once a connection is established. Select

Failed Wireless Connection

Wireless network connection failed, or no wireless router selected

Go to Network Settings

Unable to connect to a wireless router

Check the following:
11
Check that the router is turned on, and if it is, turn it off and on again.
21
Enter the correct security key if required.

IP auto setting failed

Perform the following or set the IP address manually from
11
Make sure that the DHCP server is enabled on the router and unplug and plug the router back in.
21
Enter the correct security key if required.
31
If this does not work, contact your Internet Service Provider for more information.
to Wireless automatically displays a list of available wireless networks.
and then press the router's WPS button within two minutes.
and select the correct router.
IP Settings.
OK to proceed.