Mode; Change The Broadcast Signal; Change The Channel List - Samsung F6400 Series E-Manual

Mode

You can choose the following modes : Aerial,
Analogue.
"
It can only shows the
"
Mode list may vary depending on regions and models.

Change the Broadcast Signal

Drag right on the touchpad or press the right arrow button on the remote control and then select a
broadcasting signal. This will change the signal source immediately.
Press the right arrow button on the remote and select a broadcasting signal. This will change the
signal source immediately.
<For LED 4500 - 6300, PDP 5200 Series>

Change the Channel List

Drag right on the touchpad or press the right arrow button on the remote control and then switch to
the Added Channels or Favourites list. However, the Favourites list can only be selected if it contains at
least one favourites channel. If no favourites channel was previously added, select
add channels from the
Favourites with channels.
Edit Favourites screen.
Edit Favourites, Favourites List, All, TV, Data/Other
Edit Favourites
and
and