Led F5300 Series; Network Security Protocols - Samsung F6400 Series E-Manual

LED F5300 series

Insert the Samsung wireless LAN adapter (WIS09ABGNX, WIS12ABGNX) into one of the TV's USB
ports, referring to the illustration. Without this connection, the TV cannot connect to the Internet
wireless.
Using the wireless LAN adapter may cause image retention or radio interference on some TV channels.
In those cases, use one of the following methods.
●
Use a vertical-type wireless LAN adapter.
●
Connect the wireless LAN adapter to a USB extension cable, and insert the cable's USB plug into
one of the TV's USB ports. Install the wireless LAN adapter on the top of the TV's back using an
adhesive tape.

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to
non-certified wireless routers:
●
Authentication Modes: WEP, WPAPSK, WPA2PSK
●
Encryption Types: WEP, TKIP, AES
If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode and the
Encryption Type to WEP or TKIP, Samsung SMART TVs will not support the connection in compliance
with the new Wi-Fi certification specifications.
If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network
using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically
configures the SSID and WPA key settings.