Anynet+ (Hdmi-Cec) Setup; Using The Anynet+ (Hdmi-Cec); Switching Between Anynet+ Devices - Samsung F6400 Series E-Manual

Anynet+ (HDMI-CEC) Setup

Screen Menu > System
Enable/disable Anynet+ (HDMI-CEC).
●
Anynet+ (HDMI-CEC)
Enables/disables Anynet+ (HDMI-CEC). Disabling this turns off all Anynet+-related features.
Now
●
Auto Turn Off
Turns off external devices when the TV is turned off. Some devices do not support this option.
Try Now
●
Receiver
Listen to audio through an AV receiver instead of the TV speakers. This option is only available
when there is an AV receiver connected to the TV.

Using the Anynet+ (HDMI-CEC)

You can operate external devices using just the TV remote control.

Switching between Anynet+ Devices

11
Select the Virtual Remote panel's or the regular remote's
Anynet+ (HDMI-CEC)
a device selection screen will appear.
21
Select a device and wait for the switch to take place. This process may take up to 2 minutes to
complete and cannot be cancelled when started.
"
Alternatively, switch to a different Anynet+ (HDMI-CEC) device by selecting its name from the
list. However, Anynet+ (HDMI-CEC) cannot be used if a connected input connector is selected.
> Anynet+ (HDMI-CEC)
from the list. If there is No Device appearing on the screen ,select Refresh,
Try Now
Try Now
TOOLS button to display the list. Select
Try
Source