Canon Laser Class 810 Starter Manual page 11

Install Handset (Optional)
1
Use a screwdriver to remove the cover on the right side of
the machine.
2
Attach the screws included with the machine to the
center screw holes, and attach the driver instruction label
below.
3
Screw the handset cradle onto the bracket with the
screws (A). Make sure the groove (B) side of the cradle
faces to the left.
4
Screw the bracket onto the machine with the screws (A).
5
Place the handset on the cradle.
If using the handset or an external telephone, make sure to set
the fax receive mode to <FaxTel> or <Manual>. For how to set
the receive mode, see "Set the Machine for Receiving Faxes, " on
p..
6
Connect the curly cord terminal to the back of the
modular terminal.
7
Connect the power cord into the wall outlet,
and turn the power on.
8
Confirm that you can hear a dial tone from the
handset.
0