Connect Your Camera To The Computer; Get Photos And Videos From Your Camera To Your Computer - Vivitar ViviCam 8400 Owner's Manual

the installation process. Follow the instructions to install the driver.
On Macintosh: Click the "Quit" button when the installation is complete.
13. Click the "Launch Vivitar Experience Image Manager" to open the application or
close the window and run the Vivitar Experience Image Manager from your
computer.

Connect your camera to the computer

1. Use the USB cable that came with your camera to connect your camera to your
computer.
2. Turn the camera on.
3. The first time you connect the device to the computer you will have to wait a few
seconds until the computer recognizes the device.
As your camera is a mass storage device "MSDC" will appear on the LCD,
4.
indicating that your camera is in Mass Storage Mode.
5. If your camera appears in PC Camera mode, press the OK/MENU button to change
it back to Mass Storage mode.
6. To use your camera as a PC camera, press the OK/MENU button to change it back
to PC Camera mode.

Get photos and videos from your camera to your computer

An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so
will cancel the transfer of any files on their way to your computer.
Select the "Get images" button from the Main menu
1.
.
47