Vivitar ViviCam 8400 Owner's Manual page 34

This mode is used to select the size of the matrix view the thumbnails will appear on
the LCD when the thumbnail option is selected by pressing the Zoom Out button in
the Playback mode
1.
Press the Up/Down button to select the Thumbnail mode.
2.
Press the Right button for the Thumbnail matrix options submenu to appear
2X2, 3X3, 4X4
3.
Press the Up/Down button to highlight and select the Thumbnail option you desire.
4.
Press the OK/Menu button to confirm and save your choice.
5.
Press the OK/Menu button to exit and open the Thumbnail screen of the Playback
mode with the new matrix setting of either 4, 9 or 16 images per screen view.
Set Logo
You can use this feature to select a photo you like to appear as the startup logo on
your camera.
Note: This feature will only be active for photo images with resolution lower than 8M
and if there is enough battery power, otherwise it will be grayed out.
1.
Select a photo
2.
Press the OK/Menu button
3.
Press the Up/Down button to select the Set Logo mode.
33