Connect Your Camera To The Computer - Vivitar 63009 User Manual

language and click "Next" to open the next window.
Select your camera model from the list and click "Next" to open the next window.
6.
Click "Next" to confirm your camera model selection and to install the application.
7.
8. Please wait while the application is being installed on your computer.
9. Please review the license terms.
On PC and Macintosh: Click the "I accept the terms of this license agreement" and then
click "Next" to continue.
10. On PC only: Let the "Vivitar Experience Image Manager" installer create the folder to where
the program will be installed, and then click "Install".
11. Please wait while the application continues the installation process on your computer.
12. On PC: Click the "Close" button when the installation is complete.
Click the "Launch Vivitar Experience Image Manager" to open the application.
13. On Macintosh: Click the "Quit" button when the installation is complete.
Click the "Launch Vivitar Experience Image Manager" to open the application.
14. If you close the application you can run the Vivitar Experience Image Manager from the
Programs (PC) or Applications (Mac) menu on your computer.
.

Connect your camera to the computer

1. Use the USB cable that came with your camera to connect your camera to your computer.
2. Turn the camera on.
3. The first time you connect the device to the computer you will have to wait a few seconds
until the computer recognizes the device.
4. As your camera is a mass storage device "MSDC" will appear on the LCD, indicating that
your camera is in Mass Storage Mode.
5. If your camera appears in PC Camera mode, press the Mode button to change it back to
Mass Storage mode.
6. To use your camera as a PC camera, press the Mode button to change it back to PC
Camera mode.
25