Honeywell ADEMCO VISTA 10P Installation Manual page 13

To delete Z-Wave devices using the Partner Portal:
Log in to the Partner Portal.
1.
Find the customer account.
2.
Click
3. Equipment
Click the
4. emPower Devices tab
Click
5. Delete Z-Wave Devices
Wait for the bolded message:
6.
network.
Trigger a device to delete it from the network.
7.
When a device is deleted successfully, and its network data is
8.
erased, it will show up on this screen following a 30-second
delay.
Continue triggering devices. You may delete several devices
9.
from the network without re-entering Delete Mode.
To delete Z-Wave devices using the SEM:
1. Press and hold the Z-Wave button on the Alarm.com module.
2. Release the button after LED L5 flashes in groups of two. L2 also
flashes.
3. Press and hold the Z-Wave button on the module a second time.
4. Release the Z-Wave button after LED L5 flashes in groups of two.
5. Trigger a device to erase its network data and delete it from the
network.
6. When a device is deleted successfully, L5 illuminates solid.
7. You need to re-enter Delete Mode before triggering the next device.
.
.
.
Checking for deleted devices on the
13