Visioneer Strobe XP 220 User Manual page 163

156 V S
ISIONEER TROBE
XP 220 S U '
CANNER SER S
To turn AutoLaunch Off/On for Windows 2000, you will use the
TWAIN interface:
The following steps use PaperPort to access the TWAIN interface, but
you can also use other applications which access it. If you use another
application, please see its user's guide for the steps to access the TWAIN
interface.
1. On the Windows taskbar, click Start, point to Programs, point to
PaperPort, then click PaperPort.
The PaperPort desktop opens.
2. Click the Scan icon on the PaperPort command bar.
3. From the Scanner drop-down list, select Visioneer Strobe XP 220.
4. Click the Scan button on the Scan pane.
The PaperPort TWAIN interface opens.
If the Scan button is not active, you may have to set up your
scanner first to use PaperPort. See "Setting Up Your Scanner to
Work with PaperPort" on page 129.
5. Click the scanner icon at the top right corner of the window.
G
UIDE
Click this icon.