Visioneer Strobe XP 220 User Manual page 105

98 V S
ISIONEER TROBE
XP 220 S U '
CANNER SER S
3. Select the settings you want such as Color Mode to scan in color,
resolution in dpi, and brightness. See the section, "Using the
TWAIN Interface to Scan" on page 123 for a description of all the
TWAIN scanning options.
4. Click the Scan button when you're ready to scan. The rollers will
feed the page through the rest of way and scan it with the new
settings.
T S M P
O CAN ULTIPLE AGES
You can use Configure Before Scan to create multi-page documents
from individually scanned pages.
Note: Using the Configure Before Scan option to scan multiple pages
does not apply for page formats BMP and JPG. Please make sure the
Configure Before Scan page format on the OneTouch Properties
window is set to TIFF, PDF, or one of the Text formats.
To scan multiple pages:
1. Insert the page into the scanner.
2. When the TWAIN Interface opens, select the appropriate scan
settings for your document.
3. Click the Scan button on the TWAIN Interface.
4. After the Scanning Progress bar closes, insert the next page and
click the Scan button again.
5. Continue until you have scanned all the pages in your multi-page
document.
6. When you're finished scanning, click the Done button on the
TWAIN Interface.
7. All the scanned pages will be sent to the Destination Application set
in the OneTouch Properties window. If the Destination Application
is PaperPort, the pages will be grouped as a single stack of pages.
G
UIDE