Visioneer OneTouch 58XX Installation Manual page 31

Select another
scanner setting if
you want it for
the item being
scanned.
Select other
settings here if
want them for the
item being
scanned. You also
use these settings
to customize a
scan setting.
Click Scan to scan the
item and display it in
the application.
4. From the list of Scanner Settings labeled "Scan Page For," select the
most appropriate setting for the item you're scanning. In the
example above, the selected setting is "Color Document-Faster."
5. Click the Preview button.
The scanner scans a preview of the item and displays it in the Scan
Manager. In the example below, the picture being scanned is a
close-up of a friendly cow.
6. You can now fine-tune the options on the Scan Manager for the
item you're scanning.
Note: For additional details about the Scan Manager's features click
the Help button on the Scan Manager.
Click Preview to check the
image again until it's what
you want for scanning.
S P
CANNING FROM THE APER
27
P S
ORT OFTWARE
To adjust the
size of the scan
area, or crop the
image, drag the
borders of the
selection rectan-
gle surrounding
the item.