Right Side
Interface and Buttons
1. External Antenna
Connector
2. WPS
3. OLED Screen
Front
•
It is used to connect an external antenna
to enhance the signal strength.
•
This button is used to start/end Wi-Fi
Protected Setup authentication process
and enable/disable the Wi-Fi function.
•
Hold it for 3 seconds to activate the WPS
function.
•
When the WPS function is available,
press it to deactivate the WPS function.
•
Press it to enable/disable Wi-Fi function.
•
It indicates the network type, signal
strength, battery, Wi-Fi, etc.
5
Left Side