Engineering Mode - Vision Fitness E3200 Owner's Manual

ENGINEERING MODE

Engineering mode consists of 13 optional settings. Use the engineering
mode to enable certain features or displays on your console.
ENTERING AND USING ENGINEERING MODE
• Press and hold the UP ▲ and DOWN ▼ keys for approximately three
seconds.
• The console will beep and display engineering modes and optional
settings. Use the UP ▲ or DOWN ▼ keys to scroll through the options.
Press the ENTER key to select the appropriate mode or setting.
OPTIONAL SETTINGS
S E T T I N G
P1 – SET MAX TIME
P2 – SET USER TIME
P3 – SET USER AGE
P4 – SET WEIGHT
P5 – DEFAULT
RESISTANCE LEVEL
P6 – DEFAULT LANGUAGE
P7 – UNIT
P8 – MACHINE TYPE
P9 – ACCUMULATED DATA
P10 – DISPLAY TEST
P11 – HARDWARE TEST
56
P12 – BEEPER MODE
P13 – VERSION
• Use the UP ▲ and DOWN ▼ keys within each setting to change the setting.
• Press the ENTER key to save settings.
• To EXIT engineering mode, press and hold the START key for three seconds.
D E S C R I P T I O N
ALLOWS YOU TO SET THE MAXIMUM TIME A PROGRAM CAN RUN FOR.
ALLOWS YOU TO SET THE TIME THAT THE COMPUTER WILL DEFAULT TO FOR ALL PROGRAMS.
ALLOWS YOU TO SET THE AGE THAT THE COMPUTER WILL DEFAULT TO DURING SETUP.
ALLOWS YOU TO SET THE WEIGHT THAT THE COMPUTER WILL DEFAULT TO DURING SETUP.
ALLOWS YOU TO SET THE RESISTANCE LEVEL THAT THE COMPUTER WILL DEFAULT TO FOR
ALL PROGRAMS.
ALLOWS YOU TO CHOOSE, FROM THE AVAILABLE LANGUAGES, WHAT LANGAUGE TEXT
WILL BE DISPLAYED IN.
ALLOWS YOU TO SET EXERCISE FEEDBACK TO ENGLISH (MILES) OR METRIC
(KILOMETERS) SYSTEM.
ALLOWS YOU TO SET YOUR CONSOLE TO BIKE MODE OR ELLIPTICAL MODE.
ALLOWS YOU TO VIEW THE TOTAL TIME IN HOURS AND TOTAL DISTANCE IN MILES OR
KILOMETERS ACCUMULATED ON YOUR PRODUCT.
TEST USED BY SERVICE TECHNICIANS TO TEST LCD DISPLAYS.
TEST USED BY SERVICE TECHNICIANS TO TEST EDDIE CURRENT BRAKE SYSTEM.
ALLOWS YOU TO TURN THE BEEPER ON OR OFF.
ALLOWS SERVICE TECHNICIANS TO VIEW SOFTWARE VERSION USED BY CONSOLE.