Call Manager; Environment - BT Inspiration Installation & Maintenance Manual

Call manager

PC COM Port
Mains transformer
Call manager is a PC based application which allows the customer to control their Featurephone from a PC.
The application is customer configurable and is loaded from several application disks which the customer
receives with their Call Manager equipment.
Note:
The local Featurephone must be within 3 metres of a mains supply socket in order to operate with Call
Manager. The Featurephone must be within 3 metres of the local PC in order to connect the
communications cables.
The TAPI Kit is composed of:
- The V24 Call manager module module
- A RS-232 serial cable equipped with 9 way connectors (PC to TAPI mod)
- A TAPI cable equipped with RJ11 connectors (TAPI mod to Featurephone)
- Diskettes containing the Call Manager software.
- A quick guide

Environment

The software will run on Windows 95. The minimum recommended hardware on which the application runs
is a Pentium P75 with 8MB PC. Call Manager for Windows 98 will be available in November 99.
Bit Rate:
Flow Control:
Bits:
Interface Pins:
D
C
Underside of Featurephone
19.2k bit/s full duplex
No FC
8 bits/no parity
Transmit, Receive, Ground.
Page 45
TAPI