HP Smart Array -UX 11i v2 Support Manual page 119

Sas controllers for integrity servers
Hide thumbs Also See for Smart Array HP-UX 11i v2:
Table of Contents

Advertisement

Table 24 Smart Array P41 1 controller specifications (continued)
Memory addressing
RAID levels supported
Upgradeable firmware
Cache size
Table 25 Smart Array P700m controller specifications
Card type
Dimensions (excluding bracket)
Maximum power required
Time required to recharge battery
Duration of battery backup
Battery life expectancy
Spare battery part number
Operating temperature range
Storage/Shipping temperature range
Operating relative humidity (noncondensing)
RAID levels supported
Maximum number of physical drives (using
all four ports)
Maximum number of logical drives
PCI Express transfer rate
Number of SAS ports
SAS transfer rate
Drive types supported
Cache size
Table 26 Smart Array P71 1m controller specifications
Card type
Dimensions (excluding bracket)
Maximum power required
Operating temperature range
Storage/Shipping temperature range
Operating relative humidity (noncondensing)
RAID levels supported
NOTE: Support for greater than 2TB in a single logical drive.
64-bit, supporting servers memory space greater than 4 GB
RAID 5 (Distributed Data Guarding)
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Upgradeable Firmware with Recovery ROM feature
256 MB (approximately 48 MB is used by the onboard processor)
Type I, 4-port, PCIe mezzanine board
1 1.3 cm x 10.0 cm x 2.0 cm (4.5 in x 4.0 in x 0.8 in)
Approximately 9.30 W
15 minutes to 2 hours, depending on initial battery charge level
More than 2 days, with fully-charged batteries that are less than 3 years
old
More than three years
452348-B21 (for HP Integrity BL860c servers)
383280-B21 (for HP Integrity BL870c servers)
10º to 55º C (50º to 131º F)
-30º to 60º C (-22º to 140º F)
10% to 90% (Storage/Shipping 5% to 90%)
0, 1, 1+0, 5, 6 (ADG)
108 external
32
Up to 2 GB/s in each direction
Two external; each port has four 1x links
Up to 1.2 GB/s per port in each direction
3.0 Gb/s SAS
512 MB (approximately 64 MB is used by the onboard processor)
Type I, 4-port, PCIe mezzanine board
10.1 cm x 1 1.4 cm x 2 cm (4 in x 4.5 in x 0.8 in)
Approximately 14 W
10º to 55º C (50º to 131º F)
-30º to 60º C (-22º to 140º F)
10% to 90% (Storage/Shipping 5% to 90%)
0, 1, 5, 6 (ADG), 5+0, 6+0
1 19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smart array hp-ux 11i v3

Table of Contents