HP Smart Array -UX 11i v2 Support Manual page 115

Table 20 Smart Array controller POST error codes (continued)
Error
code
1795 Slot z Drive Array - Array Accelerator
Configuration Error. Data does not correspond to
this drive array
Array Accelerator is temporarily disabled.
1796 Slot z Drive Array - Array Accelerator is Not
Responding.
Array Accelerator is temporarily disabled.
1797 Slot z Drive Array - Array Accelerator Read Error
Occurred.
Data in Array Accelerator has been lost.
Array Accelerator is disabled.
1798 Slot z Drive Array - Array Accelerator Self-Test
Error Occurred.
Array Accelerator is disabled.
1799 Slot z Drive Array - Drive(s) Disabled due to Array
Accelerator Data Loss.
1799 179A-Slot z Drive Array – Array Accelerator is
disabled Unknown Problem Code).
Array accelerator is temporarily (permanently )
disabled.
Description Level
Critical Check the array configuration.
Critical Check the cache module, and replace
if necessary.
Critical The cache module has failed. Contact
your HP service representative for
assistance.
Critical The cache module has failed. Contact
your HP service representative for
assistance.
Critical Press F1 to continue with logical drives
disabled. See
Press F2 to accept data loss and
re-enable logical drives.
Warning: Pressing F2 erases all data
in the array. Be sure you have a valid,
current backup of the affected logical
drives before selecting this option.
Critical The cache module has failed. Contact
your HP service representative for
assistance.
Corrective action
Chapter 4 (page 59).
POST error codes 1 15