Listening To Audio Playback By An External Device Through The Instrument's Speaker ([Aux In] Jack) - Yamaha PSR-SX600 Owner's Manual

Listening to Audio Playback by an External Device through the
Instrument's Speaker ([AUX IN] jack)
Audio playback by the connected device can be output from the instrument's
speaker. To input audio, connect an external device by one of the following methods.
• Connecting to the [AUX IN] jack by using an audio cable
• Connecting to the [USB TO HOST] terminal by using a USB cable (USB Audio
Interface function; page 97)
When connecting to a smart device, you can also connect by using a USB wireless
LAN adaptor (UD-WL01; sold separately). For information about connection with a
smart device, refer to page 99.
Audio Input Sound:
In this manual, "Audio Input Sound" refers to audio input to the instrument from the
external devices connected by these methods.
Playing a Portable Audio Player with the Built-in Speakers
You can connect the headphone jack of a portable audio player to the instrument's
[AUX IN] jack, letting you hear the sound of that portable audio player through the
built-in speakers of the instrument.
Phone plug
(stereo mini)
The input signal from the [AUX IN] jack is affected by the setting of the
instrument's [MASTER VOLUME] dial, and the volume balance with other sounds
played on this keyboard can be adjusted from the Balance display (page 56).
100
PSR-SX600 Owner's Manual
Portable audio
player
Headphone jack
Phone plug
(stereo mini)
Audio signal
Audio cable
NOTE
• The volume of the Audio Input
Sound can be adjusted from the
external device.
• You can adjust the volume balance
among the sounds of the instrument
and the Audio Input Sound in the
Balance display (page 56).
• You can set whether Audio Input
Sound from the external device is
output to a computer or a smart
device or not along with the perfor-
mance played on the instrument. For
details, refer to "Turning Audio
Loopback On/Off" on page 98.
NOTICE
To avoid damage to the devices,
first turn on the power to the
external device, and then to the
instrument. When turning off the
power, first turn off the power to
the instrument, and then to the
external device.
NOTE
When connecting to computer or a
smart device, you can also connect via
the [USB TO HOST] terminal
(page 97).
NOTE
You can control the input volume from
the [AUX IN] jack by using the LIVE
CONTROL knobs. For instructions on
how to assign the functions to the
knobs, refer to page 41.