Yamaha PSR-SX600 Owner's Manual page 74

Playback-related Operations
Elapsed playback time
[3 ]
Play/Pause
[4 ]
Stop
[5 ]
Prev
[6 ]
Next
[7 ]
A-B Repeat
[8 ]
Setting
A-B Repeat Playback
The specified section (between the A and B points) can be played back repeatedly.
1. To set the A point, press the [7 ] (A B) buttons when playback reaches to the desired point.
The time set as the A point is shown in at "A [--:--]" in the display, and is indicated by the first wedge mark in
the playback progress bar.
2. To set the B point, press the [7 ] (A B) buttons again when playback reaches to the desired point.
The time set as the B point is shown in at "B [--:--]" in the display, and is indicated by the second wedge mark
in the playback progress bar.
The specified A-B section of the audio file will now play back repeatedly.
3. To cancel Repeat playback, press the [7 ] (A B) buttons again.
Repeat Playback mode
Press the [8 ] (Setting) buttons to call up the pop-up display for audio setting, and then use the [1 ]/[2
] buttons to select the REPEAT MODE.
• Off ( ) .................Plays through the selected file, and then stops.
• Single ( ) ....................Plays through the selected file repeatedly.
• All ( ) ......................... Continues playback through all the files in the current folder repeatedly.
• Random ( )................ Randomly and repeatedly plays back all files in the current folder.
Adjusting the volume of audio playback
To adjust the volume, press the [8 ] (Setting) buttons to call up the pop-up display for audio settings, and then
use the [5 ] (Audio Volume) buttons.
74
PSR-SX600 Owner's Manual
Total playback time
Pop-up display for audio settings
Starts or pauses playback at the current position.
Stops playback.
Pressing this changes the file to the previous one; holding it moves continuously back
through the current file (in seconds).
Pressing this changes the file to the next one; holding it moves continuously forward
through the current file (in seconds).
See below.
Pressing this calls up the pop-up display for audio settings. You can set detailed parameters
for audio playback here, such as Volume, Vocal Cancel, Time Stretch, and Pitch Shift. To
close this, press the [8 ] (Close) buttons.