Connections - Using Your Instrument With Other Devices; Connecting An Audio Device (Aux In Jack); Connecting To A Computer (Usb To Host Terminal) - Yamaha Portable Grand DGX-660 Owner's Manual

Connections – Using Your Instrument with Other Devices –
To see where the connectors are located on the instrument, refer to pages 16, 17.
CAUTION
• Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turn-
ing any components on or off, make sure to set all volume levels to minimum (0). Otherwise, damage to the components, elec-
trical shock, or even permanent hearing loss may occur.
Connecting an Audio Device
(AUX IN jack)
You can connect the output jack of an external device
such as portable audio player to the instrument's AUX
IN jack, letting you hear the sound of that device
through the built-in speakers of the instrument.
NOTICE
• To avoid damaging the device, first turn on the power to
the external device, then to the instrument. When turning
off the power, first turn off the power to the instrument,
then to the external device.
Stereo
mini plug
NOTE
• Use audio cables and adaptor plugs having no (zero) resis-
tance.
• You can adjust the volume of the sound input via the AUX IN
jack from the external audio device. To do this, press the
[FUNCTION] button then use the CATEGORY buttons to select
"AUX IN Level, " then adjust the value by using the dial.
76
DGX-660 Owner's Manual
Audio device (portable
audio player, etc.)
Connecting to a Computer (USB
TO HOST terminal)
By connecting a computer to the USB TO HOST ter-
minal, you can transfer data between the instrument
and the computer via MIDI. For details on using a
computer with this instrument, refer to "Computer-
related Operations" on the website (page 8).
USB
terminal
USB
cable
NOTICE
• Use an AB type USB cable of less than 3 meters. USB 3.0
cables cannot be used.
NOTE
• The instrument will begin transmission a short time after the
USB connection is made.
• When using a USB cable to connect the instrument to your
computer, make the connection directly without passing
through a USB hub.
• For information on setting up your sequence software, refer to
the owner's manual of the relevant software.
USB TO HOST
terminal
Instrument