Chiller Status Area - Trane Tracer AdaptiView User Manual

Figure 2. Tracer AdaptiView display (Home screen for Simplex chillers is shown)
1
1.
2.
3.

Chiller Status Area

The chiller status area (shown as Location 1 in
every screen on the Tracer® AdaptiView™ display. Basic information about chiller status and
control appears on the face of the buttons and touch targets. When touched, the buttons and
touch targets open other screens that provide more information and control access. The
following table provides the details.
Table 1. Chiller status area
Button/Touch target
Chiller status button
Alarm indicator button
Manual override button
CTV-SVU01G-EN
"Chiller Status Area," p. 9
"Main Display Area/Home Screen," p. 10
models and the Duplex™ chiller models.
"Main Menu Area," p. 17
Description
The top-level operating mode of the chiller appears on the chiller status button. Touch this button to
view the Chiller Operating Mode screen.
Note: For more information, refer to
If an active alarm exists, the alarm indicator button appears with the alarm severity indicated on it. If
there is more than one alarm, the most severe appears. You can touch this button as an alternate way
to view the Alarms screen.
Note: For more information, refer to
If a manual override exists but no active alarm exists, a manual override button appears in the same
location as the alarm indicator button. If neither an alarm nor a manual override exist, no button
appears.
If a manual override exists, you can touch this button as an alternate way to view the Manual Control
Settings screen.
Note: For more information, refer to
This area is different between the Simplex chiller
Table 2, p. 11 describes the differences.
"Screen Overview," p.
"Reports," p. 65 .
"Alarms," p. 20.
"Manual Control Settings," p. 47.
P P r r o o d d u u c c t t O O v v e e r r v v i i e e w w
8) remains visible from
9