Emaplaat; Removing The System Board - Uma - Dell Vostro 5401 Service Manual

Steps
1. Place the display assembly on a clean and flat surface.
2. Align and place the palm-rest and keyboard assembly on the display assembly.
3. Using the alignment posts, close the display hinges.
4. Replace the two screws (M2.5x4) and (M2x3) that secure the left-display hinge to the system board.
5. Replace the two screws (M2.5x4) that secure the right-display hinge to the system board.
6. Connect the display cable on to the connector on the system board and adhere the tape to the system board.
Next steps
1. Install the WLAN card.
2. Install the battery.
3. Install the base cover.
4. Follow the procedure in

Emaplaat

Removing the system board - UMA

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the coin-cell battery.
5. Remove the M.2 2280 solid-state
80 Lahtivõtmine ja kokkupanek
after working inside your computer.
before working inside your
drive.
computer.