Steps
1. Place the DC-in port on the palm-rest and keyboard assembly.
2. Replace the single screw (M2x3) on the DC-in port using bracket.
3. Connect the DC-in cable to the system board.
4. Adhere the transparent sticker.
5. Lower the metal hinge.
6. Replace the two (M2.5x4) screws, and tighten it.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Puuteplaat
Removing the touchpad - UMA
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
after working inside your
computer.
before working inside your
computer.
Lahtivõtmine ja kokkupanek
67