About this task
The figure indicates the location of the coin-cell battery and provides a visual representation of the installation procedure.
Steps
1. Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly.
2. Route the coin-cell battery cable as illustrated and connect it to the I/O board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
I/O-paneel
Removing the I/O board - UMA
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
system
fan.
5. Remove the
coin-cell
battery.
About this task
The figure indicates the location of the I/O board and provides a visual representation of the removal procedure.
after working inside your
computer.
before working inside your
computer.
Lahtivõtmine ja kokkupanek
55