Chapter 3: Lahtivõtmine Ja Kokkupanek; Recommended Tools; Screw List - Dell Vostro 5401 Service Manual

Teemad:
•

Recommended tools

•

Screw list

• tagakaas
• aku
• WLAN-kaart
• Mälumoodulid
• Pooljuhtketas
• Kõlarid
• System fan
• Jahutusradiaator
• Nööppatarei
• I/O-paneel
• Power button with fingerprint reader (optional)
• DC-in port
• Puuteplaat
• Ekraanisõlm
• Emaplaat
• Randmetoe ja klaviatuurisõlm
Recommended tools
The procedures in this document may require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe (recommended for field technicians)
NOTE: The #0 screw driver is for screws 0-1, and the #1 screw driver is for screws 2-4.
Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Lahtivõtmine ja kokkupanek
Screw type Quantity
M2x8.8 - captive 2
M2x4 5
Screw image
Lahtivõtmine ja kokkupanek
3
13