Nööppatarei; Removing The Coin-Cell Battery - Uma - Dell Vostro 5401 Service Manual

Steps
1. Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board.
Next steps
1. Install the system fan.
2. Install the battery.
3. Install the base cover.
4. Follow the procedure in
Nööppatarei

Removing the coin-cell battery - UMA

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
NOTE: Removing the coin-cell battery resets the BIOS setup program settings to default. It is recommended that you
note the BIOS setup program settings before removing the coin-cell battery.
About this task
The figure indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
52 Lahtivõtmine ja kokkupanek
after working inside your computer.
before working inside your computer.