About this task
The figure indicates the location of the battery in a discrete configuration and provides a visual representation of the installation
procedure.
Steps
1. Place the battery on the palm-rest and keyboard assembly and align the screw holes on the battery with the screw holes on the palm-
rest and keyboard assembly.
2. Install the four screws (M2x3) that secure the battery to the system board and palm-rest and keyboard assembly.
3. Connect the battery cable to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
WLAN-kaart
Removing the WLAN card - UMA
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The figure indicates the location of the WLAN card and provides a visual representation of the removal procedure.
22
Lahtivõtmine ja kokkupanek
after working inside your
computer.
before working inside your
computer.